The KEF Ci160CR speaker is ideal for getting the best sound from your home cinema or multi room system without taking up any floor space. The near flush mounting grille of the Ci160CR can be painted to blend in with your decor and their high tolerance to moisture, heat and humidity mean you can install them in your kitchen, bathroom or even under the eaves outside.
The Ci160CR uses KEF's "Uni-Q" array technology, now improved with the addition of a "tweeter island" which reduces diffraction and enhances off-axis, high frequency response. The active tweeter in the centre of the speaker gives a wide and even sound dispersal so there is good sound all around the room rather than in just one or two prime spots.
The Ci160CR speaker doesn't need an additional mounting frame as the integral clamps will attach firmly by themselves. Each Ci160CR speaker comes with a template for marking wall or ceiling sections to be cut out and a paint shield to protect the drive units whilst you are decorating. Because these speakers require fitting we recommend checking the instruction manual to determine whether they are suitable for your house.
|Crossover frequency (kHz)||3.4|
|Drivers ||LF: 160mm|
|Extra||No mounting frame required, fixed by integral clamps.|
|Finish ||paintable grille and bezel|
|Frequency response (Hz)||52 - 20,000|
|Nominal impedance (ohms) ||8|
|Recommended amp power (watts)||10 - 100|
|W x H x D (mm) ||235 diameter x 93|
Mounting hole: 196 diameter