The E3 cartridge, the highest in the range features the same aluminium cantilever as the E2, but benefits from a superior bonded, super-elliptical (0.3 x 0.7 mil) stylus. This gives it superior high frequency groove detail retrieval ability over ordinary elliptical (0.4 x 0.7 mil) or spherical (0.6 mil) styli due to its smaller front to back radius. Its main effect is the reduction of sibilance, especially in high level vocal recordings
The E Range
The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series are designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of our Magnetic Duplex Technology and Goldring Expert Adjustment.
All cartridges in the range feature Magnetic Duplex Technology™ - a 'dual magnet' generator assembly which more accurately traces the record groove providing better stereo separation and a more involving and musical sound stage.
The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.
Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge.
The E3 model with its refined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.
|Compatibility||Compatible with all tonearms with standard 12.7 mm (0.5 in) fixing centres|
Channel Balance: 1.5 dB at 1 kHz
Channel Seperation: >20 dB at 1 kHz
Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
Static Compliance: 20 mm/N
Vertical Tracking Angle: 208
Internal Inductance: 400 mH
Internal Resistance: 410 Ohm
|Frequency range (Hz)||20 Hz - 20 kHz|
|Load capacitance||100 - 200 pF|
|Load resistance||47 kOhm|
|Tracking weight||1.5 g - 2.5 g (2.0 g recommended)|
|Type||Moving Magnet Cartridge|
|W x H x D (mm) ||Fixing Centres: 12.7mm (0.5 inches)|
|Weight (kg) ||0.0069|