Search
banner

Monitor Audio Monitor MRW-10 Subwoofer

The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.
Manufacturer: Monitor Audio
SKU: 60693
  • *
£350.00
decrease increase

The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.

The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.

Products specifications
Amplifier power (watts)

100 W RMS

Amplifier Classification: Class D with Switch mode PSU

Compatibility Input Level Requirements: Standby after approximately 15 minutes if no signal sensed
Connections x2 Stereo RCA connection
x1 LFE RCA connection
x1 12 V trigger (3.5 mm mono mini-jack)
Drivers x1 10" MMP II long throw driver
Extra Phase Control: 0 - 180 degrees
Finish Black, White or Walnut
Power handling (watts) Fuse Specification:
110 – 120 VAC – T4AL/250VAC
220 – 240 VAC – T4AL/250VAC

Standby Power Consumption: <0.5 W 

Mains Input Voltage:
110 – 120 Vac – 50 – 60 Hz
220 – 240 Vac – 50 – 60 Hz
Sound system

Lower Frequency Limit: 30Hz (-6dB)
Upper Frequency Limit: Variable 50 – 120 Hz @ 24 dB/Octave
Input Impedance: >20 K ohms
Bass EQ Profiles: Music/Movie/Impact

W x H x D (mm) 320 x 336 x 350.6
Weight (kg) 10.54
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
*

The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.

The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.

Products specifications
Amplifier power (watts)

100 W RMS

Amplifier Classification: Class D with Switch mode PSU

Compatibility Input Level Requirements: Standby after approximately 15 minutes if no signal sensed
Connections x2 Stereo RCA connection
x1 LFE RCA connection
x1 12 V trigger (3.5 mm mono mini-jack)
Drivers x1 10" MMP II long throw driver
Extra Phase Control: 0 - 180 degrees
Finish Black, White or Walnut
Power handling (watts) Fuse Specification:
110 – 120 VAC – T4AL/250VAC
220 – 240 VAC – T4AL/250VAC

Standby Power Consumption: <0.5 W 

Mains Input Voltage:
110 – 120 Vac – 50 – 60 Hz
220 – 240 Vac – 50 – 60 Hz
Sound system

Lower Frequency Limit: 30Hz (-6dB)
Upper Frequency Limit: Variable 50 – 120 Hz @ 24 dB/Octave
Input Impedance: >20 K ohms
Bass EQ Profiles: Music/Movie/Impact

W x H x D (mm) 320 x 336 x 350.6
Weight (kg) 10.54
Trustpilot
Filters
Sort
display