Search
banner

Goldring E1 Moving Magnet Cartridge

- Carbon fibre reinforced cantilever
- Bonded, spherical (0.6 mil) stylus with a round shank
- Dual Magnet
- Ideal upgrade to any budget, pre-fitted or obsolete cartridge
- Moving Magnet
Manufacturer: Goldring
SKU: 59438
£59.95
decrease increase

The E1 cartridge, the first in the range, utilises a carbon fibre reinforced cantilever with a bonded, spherical (0.6 mil) stylus with a round shank. Carbon is an effective alternative to more premium aluminium or boron materials, producing comparable results in most entry level hi-fi applications.


The E Range


The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series are designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of our Magnetic Duplex Technology and Goldring Expert Adjustment.


All cartridges in the range feature Magnetic Duplex Technology™ - a 'dual magnet' generator assembly which more accurately traces the record groove providing better stereo separation and a more involving and musical sound stage.


The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.


Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge.


The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

Products specifications
Compatibility Compatible with all tonearms with standard 12.7 mm (0.5 in) fixing centres
Extra Cantilever: Carbon
Channel Balance: 1.5 dB at 1 kHz
Channel Seperation: >20 dB at 1 kHz
Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
Static Compliance: 20 mm/N
Vertical Tracking Angle: 208
Internal Inductance: 400 mH
Internal Resistance: 410 Ohm
Finish Red
Frequency range (Hz) 20 Hz - 20 kHz
Load capacitance 100 - 200 pF
Load resistance 47 kOhm
Stylus shape Spherical (radius: 0.6mil)
Tracking weight 1.5 g - 2.5 g (2.0 g recommended)
Type Moving Magnet Cartridge
W x H x D (mm) Fixing Centres: 12.7mm (0.5 inches)
Weight (kg) 0.0069
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
*

The E1 cartridge, the first in the range, utilises a carbon fibre reinforced cantilever with a bonded, spherical (0.6 mil) stylus with a round shank. Carbon is an effective alternative to more premium aluminium or boron materials, producing comparable results in most entry level hi-fi applications.


The E Range


The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series are designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of our Magnetic Duplex Technology and Goldring Expert Adjustment.


All cartridges in the range feature Magnetic Duplex Technology™ - a 'dual magnet' generator assembly which more accurately traces the record groove providing better stereo separation and a more involving and musical sound stage.


The E-series cartridges have been designed to allow micro-adjustments to be made during production using a special adjustment screw. This means the cartridge can be safely installed in a typical turntable because the angle that the stylus makes with the record surface has been pre-set. The result is an optimised channel balance with zero degrees of horizontal tracking adjustment required. This ensures a consistent and reassuring performance for the life of the product.


Featuring spherical styli with a choice of cantilevers, the E1 and E2 models are ideal as an upgrade to any budget, pre-fitted or obsolete cartridge.


The E3 model with its re­fined super elliptical stylus is a worthwhile upgrade for those wishing to squeeze even more information and detail from the record groove.

Products specifications
Compatibility Compatible with all tonearms with standard 12.7 mm (0.5 in) fixing centres
Extra Cantilever: Carbon
Channel Balance: 1.5 dB at 1 kHz
Channel Seperation: >20 dB at 1 kHz
Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
Static Compliance: 20 mm/N
Vertical Tracking Angle: 208
Internal Inductance: 400 mH
Internal Resistance: 410 Ohm
Finish Red
Frequency range (Hz) 20 Hz - 20 kHz
Load capacitance 100 - 200 pF
Load resistance 47 kOhm
Stylus shape Spherical (radius: 0.6mil)
Tracking weight 1.5 g - 2.5 g (2.0 g recommended)
Type Moving Magnet Cartridge
W x H x D (mm) Fixing Centres: 12.7mm (0.5 inches)
Weight (kg) 0.0069
Trustpilot
Filters
Sort
display