Search
banner

Audio Technica AT-VM95ML Microlinear Stereo Cartridge

The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus.
Manufacturer: Audio-Technica
SKU: 63480
£149.00
decrease increase

The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. 

The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

Compatible with each of the 6 replacement styli in the VM95 range!

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Products specifications
Extra Frequency Response: 20 - 25,000 Hz
Channel Separation: 23 dB (1 kHz)
Output Channel Balance: 1.5 dB (1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0g)
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 kΩ (1 kHz)
Coil Inductance: 550 mH (1 kHz)
DC Resistance: 485 Ω
Static Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)
Wire Used For Coil: T.P. Copper
Recommended Load Impedance: 47,000 Ω
Load capacitance 100-200 pF (Recommended)
Mounting 1/2" centres
Output voltage 3.5 mV (@1 khz, 5 cm/sec)
Stylus shape Microlinear (2.2 x 0.12 mil) - Nude Square Shank
Supplied accessories 11 mm Installation screws x2
8 mm Installation screws x2
Washers x2
Non-magnetic screwdriver x1
Type VM Stereo Dual Magnet
W x H x D (mm) 18.9 x 17.2 x 28.3
Weight (kg) 0.0061
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
*

The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. 

The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.

Compatible with each of the 6 replacement styli in the VM95 range!

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Products specifications
Extra Frequency Response: 20 - 25,000 Hz
Channel Separation: 23 dB (1 kHz)
Output Channel Balance: 1.5 dB (1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0g)
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 kΩ (1 kHz)
Coil Inductance: 550 mH (1 kHz)
DC Resistance: 485 Ω
Static Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)
Wire Used For Coil: T.P. Copper
Recommended Load Impedance: 47,000 Ω
Load capacitance 100-200 pF (Recommended)
Mounting 1/2" centres
Output voltage 3.5 mV (@1 khz, 5 cm/sec)
Stylus shape Microlinear (2.2 x 0.12 mil) - Nude Square Shank
Supplied accessories 11 mm Installation screws x2
8 mm Installation screws x2
Washers x2
Non-magnetic screwdriver x1
Type VM Stereo Dual Magnet
W x H x D (mm) 18.9 x 17.2 x 28.3
Weight (kg) 0.0061
Trustpilot
Filters
Sort
display