Search

Audio Technica AT-VM95E Elliptical Stereo Cartridge

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015.
Manufacturer: Audio-Technica
SKU: 63478
£43.00
decrease increase

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. 

The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Compatible with each of the 6 replacement styli in the VM95 range!

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Products specifications
Extra Frequency Response: 20 - 22,000 Hz
Channel Separation: 20 dB (1 kHz)
Output Channel Balance: 2.0 dB (1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0g)
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 kΩ (1 kHz)
Coil Inductance: 550 mH (1 kHz)
DC Resistance: 485 Ω
Static Compliance: 17 x 10 – 6 cm / dyne
Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
Wire Used For Coil: T.P. Copper
Recommended Load Impedance: 47,000 Ω
Load capacitance 100-200 pF (Recommended)
Mounting 1/2" centres
Output voltage 4.0 mV (@1 khz, 5 cm/sec)
Stylus shape Elliptical (0.3 x 0.7 mil) - Bonded Round Shank
Supplied accessories 11 mm Installation screws x2
8 mm Installation screws x2
Washers x2
Type VM Stereo Dual Magnet
W x H x D (mm) 18.9 x 17.2 x 28.3
Weight (kg) 0.0061
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
*

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. 

The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Compatible with each of the 6 replacement styli in the VM95 range!

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Products specifications
Extra Frequency Response: 20 - 22,000 Hz
Channel Separation: 20 dB (1 kHz)
Output Channel Balance: 2.0 dB (1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0g)
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 kΩ (1 kHz)
Coil Inductance: 550 mH (1 kHz)
DC Resistance: 485 Ω
Static Compliance: 17 x 10 – 6 cm / dyne
Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
Wire Used For Coil: T.P. Copper
Recommended Load Impedance: 47,000 Ω
Load capacitance 100-200 pF (Recommended)
Mounting 1/2" centres
Output voltage 4.0 mV (@1 khz, 5 cm/sec)
Stylus shape Elliptical (0.3 x 0.7 mil) - Bonded Round Shank
Supplied accessories 11 mm Installation screws x2
8 mm Installation screws x2
Washers x2
Type VM Stereo Dual Magnet
W x H x D (mm) 18.9 x 17.2 x 28.3
Weight (kg) 0.0061
Trustpilot
Filters
Sort
display