Search

Audio Technica AT-VM95C Conical Stereo Cartridge

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL
Manufacturer: Audio-Technica
SKU: 63477
£30.00
decrease increase

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Compatible with each of the 6 replacement styli in the VM95 range!

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Products specifications
Extra Frequency Response: 20 - 20,000 Hz
Channel Separation: 18 dB (1 kHz)
Output Channel Balance: 2.5 dB (1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0g)
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 kΩ (1 kHz)
Coil Inductance: 550 mH (1 kHz)
DC Resistance: 485 Ω
Static Compliance: 17 x 10 – 6 cm / dyne
Dynamic Compliance: 6.5 x 10 – 6 cm / dyne (100 Hz)
Wire Used For Coil: T.P. Copper
Recommended Load Impedance: 47,000 Ω
Load capacitance 100-200 pF (Recommended)
Mounting 1/2" centres
Output voltage 4.0 mV (@1 khz, 5 cm/sec)
Stylus shape Conical (0.6 mil) - Bonded Round Shank
Supplied accessories 11 mm Installation screws x2
8 mm Installation screws x2
Washers x2
Type VM Stereo Dual Magnet
W x H x D (mm) 18.9 x 17.2 x 28.3
Weight (kg) 0.0061
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*
*

The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Compatible with each of the 6 replacement styli in the VM95 range!

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

Products specifications
Extra Frequency Response: 20 - 20,000 Hz
Channel Separation: 18 dB (1 kHz)
Output Channel Balance: 2.5 dB (1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0g)
Cantilever: Aluminium Pipe
Coil Impedance: 3.3 kΩ (1 kHz)
Coil Inductance: 550 mH (1 kHz)
DC Resistance: 485 Ω
Static Compliance: 17 x 10 – 6 cm / dyne
Dynamic Compliance: 6.5 x 10 – 6 cm / dyne (100 Hz)
Wire Used For Coil: T.P. Copper
Recommended Load Impedance: 47,000 Ω
Load capacitance 100-200 pF (Recommended)
Mounting 1/2" centres
Output voltage 4.0 mV (@1 khz, 5 cm/sec)
Stylus shape Conical (0.6 mil) - Bonded Round Shank
Supplied accessories 11 mm Installation screws x2
8 mm Installation screws x2
Washers x2
Type VM Stereo Dual Magnet
W x H x D (mm) 18.9 x 17.2 x 28.3
Weight (kg) 0.0061
Trustpilot
Filters
Sort
display